Question about Nikon D Cameras
...SIGMA 28-200 lens - works on one D200 and not my other I sent one of my D200's in for service and when it was returned it had firmware v 2.0.0 on it. I have a SIGMA DG 28-200mm lens that works great ...
...sigma 28 to 200 mm) The canon lens should work fine. Some of the Sigma lenses have to be converted by Sigma to work with digital. The last one I sent to them they only charged me $10 for return ...
...Sigma 28-128 lens 2x18-55 lenses My problem= Silver body over expose most off the photos. I did reset setting ,reload firmware,check settings again but silver body keeps over expose on the other hand ...
...28-135 is. Yesterday I recieved a Canon 2.8 IS L 70 -200mm. When I mount the camera to the lens ( the 70-200) I notice a little wiggle in the mount attachment. I went back and checked to see if my ...
...Sigma 28-200 lens If this dot is fuzzy, then you will need to have the camera sensor cleaned. If the dot is in focus, then you may have one or more dead pixels on your sensor. You can purchase sensor ...
...28-200 sigma D nikon fit lens. In auto focus when you get to1.5 metre bottom focus it will not return to up focus . It will only up focus if you slightly turn focus ring back may be 1mm. It sounds as ...
...28-200 Canon Lens for over a month again no problem. A couple of days ago it started giving an err99 message. I cleaned the contacts between the lens no fix. Now whenever I put the battery in the ...
...Alpha 200 camera as I try to shoot a photo. Lens is Sigma 28-300. This as worked always since new in 2008. Any advice. Best regards Eivind Clean the electrical contacts on the lens then try it
Question about Canon Cameras
...lens, but with Sigma 28-200 I get error code 99 and told to switch off and on. this only repeats fault. Any advice would be welcome try cleaning the lens contact points with and eraser should
81 questions posted
Usually answered in minutes!
671 Questions
616 Questions
504 Questions
483 Questions
426 Questions