Question about OKI Office Equipment & Supplies
...Turn power off, then on. Error 53 Open left door and remove any jammed media. Tun the printer off, then on. Error 60 Remove the media from the Multi-Purpose Tray. Turn the printer off, then on. ...
Question about OKI Office Equipment & Supplies
...turn off. then it turns on. and says "fax mode". looks good. then it turns off. completely off. unplug it to get it to try again. no go. please help. Brian. Utah 801 636 0969 I used the reset steps ...
off and then turn it back on. You will have to turn the printer off twice and then it will recalibrate. After holding down OK, Cancel, Black and Color buttons while turning it off, I turned it back on
Scanner 5 error - turn off / turn on Scanner 8 error - turn off / turn on Scanner 2 error - turn off / turn on The laser assembly or main board might have an issue.
...turn off when main power switch is turned off. When main power switch is turned off, power light and panel display go off. But still working other parts In other words, it has a noise and getting hot ...
...turn off the printer and turn it back on " When I press "oK", I get the message, "do not turn off by unpluging or turning off the surgeprotector or you may damage the printer" any suggestions ? The ...
Question about Ricoh Office Equipment & Supplies
...turn off, the solenoid is turned off for 1 seconds. · The solenoid is once again turned on for 3 seconds. · If the main switch does not turn off at this point, the solenoid turns off and ...
...off turn printer on remove both carts turn printer off turn printer on replace carts turn off turn onthat should clear up the issue if not you need to try replacing the cartridges or removing and ...
turn it off HELP! The ON button (on your control panel) turns the machine on or off. When the machine is "off" a minimal amount of power is still supplied to the machine. It's like in "sleep" or stand
36 questions posted
Usually answered in minutes!
259 Questions
172 Questions
152 Questions
147 Questions
126 Questions