...changed cartridges but it still prints with whit streaks Check the remaining service life of the drums, also check the condition of your transfer belt. It is most likely your problem is one of those ...
...BELT...life counts 8) power OFF printer, wait 10 sec, and power ON again.. To access Service Mode in C9300 power ON printer with 0, 1, 6, 7 at same time...you can do some good damage in there!! (I ...
...belt unit and the drum need to be changed even though they have both been changed recently. Is this a problem with the printer or the belt unit/drum? You probably need to reset the counter on the ...
Question about Dell Office Equipment & Supplies
...- replace when defective - no 'fixed' life, but if you are replacing fuser, it's worth changing the pickup and transport rollers at the same time. Note Transfer belt also has a 100,000 page
Question about OKI C Office Equipment & Supplies
...or glass fuses ,the value 0,065mA/250V rapid fuse.After change the fuse pull on the unit and turn ON the copier.Before change the fuse reset the transfer belt counter in the Present parts life
Question about OKI C Office Equipment & Supplies
belt life ends soon mean, on a brother MFC 9440ch color laser printer? Are you sure of the error message? The Brother printers that I have used have Drum Ends Soon and Change Belt messages.The Brother
...changed the drum unit and belt unit, there are still 2 warnings appearing to ask for changing the belt and drum unit. first you are talking about the FUSER END message that means you have to change ...
Question about OKI C Office Equipment & Supplies
...life of the transfer unit on a Bizhub C250 Konica Minolta Laser Printer?and how would you do this Yes, Remove Trasfert belt unit. On the left handled remove one screw ( spring fixer) and remove right ...
...belt has reached the end of its' rated life. You could clear the counter with Sim 24-4 but your copy and print quality will change. Eventually your belt will wear out, develop cracks and then split. ...
...changed or refurbished). Please note that anytime you turn the printer off, you will have to go through the whole process again when you turn it back on. It doesn't take long though, and will quickly ...
215 questions posted
Usually answered in minutes!
172 Questions
152 Questions
126 Questions
93 Questions
81 Questions
