...furnace. After a while the system cuts off and then starts trying again with the same results. You may have a dirty/rusty burner that is clogged or your gas valve manifold pressure setting may be too ...
...furnace is shut off. Then after about 1/2hour the power can be restored and the furnace will repeat the same cycle. I checked the cool down switch and it seems to open and close in response to heat ...
...1-2 seconds if i shut off the furnace power for a few minutes then turn it back on it may work properly or i have to do this numerous times new ignitor one month ago ? trouble code was flashing ...
furnace and it ignites. The error code is 1 short blink of the red light followed by 4 long. Please let me know the problem. Thanks for your help. First of all when you flip the switch, it goes thru a
...furnace repair guys to look at it and it's still not working! Frankly, they are stumped and are telling me to replace it. It's only 5 years Old!!! Your hot surface igniter may be bad. It may be ...
Question about Heating & Cooling
...1) Thermostat sends signal to furnace when temp drops. 2) Exhaust fan comes on for a minute or so. 3) Ignitor comes on and glows. 4) Gas turns on and ignites. 5) After about 10 seconds gas turns off. ...
Question about Carrier Heating & Cooling
...1, series 170, 66,000 BTU furnace. The intake/exhaust fan starts when the thermostat tells it to, the pilot lights, but the main flame does not ignite. The problem started this morning I changed ...
...Furnace. When the heather kicks on, the fan kicks on first, the igniter tries to light... 1 of the inshot burners comes on, and after about 3 seconds cuts off. it repeats this process 3 or 4 more ...
...1 Hi, Furnace has been serviced regularly each year. Ran fine last winter, air worked fine all summer when needed. When I turned thermostat to heat and dial up to call for heat the inducer fan starts ...
...furnace has a bad ignitor what I see most of the time is the following sequence of operation: 1. Thermostat calls for heat. 2. Draft inducer motor starts. 3. Pressure switch attached by a small ...
288 questions posted
Usually answered in minutes!
713 Questions
136 Questions
135 Questions
72 Questions
53 Questions