Polaroid FLM-3225 32 in. LCD Television "tda 03211c sound video" Questions

...24vdc feeding it, if not, check the power supply module, it should have 5vdc, 12vdc, and 24vdc at the output connectors. Parts:

My TV has Audio but no video? Not sure what to add. Watching, then no video. No sounds to make me think something was wrong. Back - light problem. Check and replace damaged component/s at its ...

...sound. The color is slightly off despite adjustments from the menu screen. Any suggestions please? Yes, in these sets almost all the audio circuit is on the main signal board which with this model is ...

...LED light indication flashes or no power at all or have sound no video.Tell me the current cause of the tv now,so i will tries diagnose the problems and help u to buy refurbishes boards to fix

...sound was ok last night Capacitors went bad, There is two of them that control this . and are quite easily identifed. They are 10uf 450v capacitors. You can get them off E bay , or possibly at radio ...

...TDA-03211C 32" LCD. I changed from my component video inputs to the ones on the side of the TV and that works. Seems like the high quality video receiver, i.e. the control box, is the problem, per ...

...sound after the video dies in a few sec.?Yes,there are sound than ur LCD inverter board is dead.No,there are no sound than ur T-con board is dead.U have a little machanical skills take ur tv ...

...video's on this. If you would like I could send you , just shoot me an e mail . [email protected] do you have an answer to why my polaroid 32 inch went black?still have sound it was ok when shut ...

...sound but no picture More than likely your t.v has bad capacitors that power up the light bulbs that light up the screen. I had the same problem with a similar Polaroid t.v. and replaced two bad ...

...tda-03211c powers up with blue screen and no signal on screen, has no sound or video. what is the problem? IC fault. If you wish to get some details; check the site linked here. Pull up older posts. ...