i have a 42 inch panasonic viera th-p42g10a. i have dvd connected to av1, foxtel to av2, av3 is vacant. I have lost volume to both dvd and foxtel connections, yet i still have volume when watching ...
...Than i connect the audio cable to the tv use 3.5mm j. it only has sound when I use input and select AV3 but no pictrue this time. So the tv has either show picture when I select Input RGB Or the tv ...
how do I change the AV3 to out via the OSD on my Acer TV ? press the display or status button once on the remote :)
the tv went out one nite and when it came back on it now says no signal... i have a lt37hvs make sure that the correct input for TV is selected (AV1, AV2, AV3, HDMI, Component etc)
DELETE AV3 SONY ON TOP LEFT HAND CORNER hi, Press the DISPLAY button on the remote repeatedly to get ride off the onscreen display. OK
Question about Televison & Video
How can i label my source (TV,av1,av2,av3,hdmi1,hdmi2,hdmi3,side av )???? Does the TV have that feature? If you, then you are wasting your time. Read the manual.
...signal when I try to play a dvd on channel 3 There may be a chance you have hooked it up to play on AV3, as opposed to CH3. There should be an AV button on your remote or the TV. Press it a few times ...
how to setup tv with set top box rca to rac or hdmi to hdmi cables then select av on the tv to which ever one you connect it to eg avi av2 av3 or hdmi 1 hdmi 2 etc
NO AV1 AND 2 VIDEO SIGNAL SWITCHES TO AV1 AND AV2 SOUND BUT NO VIDEO SIGNAL.VIDEO SIGNAL ON AV3 PHONO OK. tv start working on its own.
Question about Samsung Televison & Video
...it show black and white picture but only on componet 1.and i don't know why. i activate av1,av3 and av3 in service. my tv come on and off. i can't inter in service. samsung 42, PS42C430, SO ...
2 questions posted
Usually answered in minutes!
44 Questions
13 Questions
11 Questions
9 Questions
11 Questions