Zenith DBZN-311 Remote Control "buttons wear" Questions

where is the tivo button located? My remote has all the writing rubbed thru wear and tare. Can you tell me how to locate the tivo button. Generally, the Tivo button is at the very top of the Remote, ...

Do these "wear" out after a few years? Buttons Do these "wear" out after a few years? Buttons are slow to react. yes is it right

...buttons may wear off over time. You can verify by opening up the remote (leave the batteries in). Place a conductor (flat screw driver, knife edge, etc.) on the circuit board area equivalent to the ...

no lite when hitting on/off or search button I have sentry rmc-10 universal remote. I checked the batterys and still does not work As I say again and again Wires Wires Wires.Check em and make sure ...

Hello, my remote is two wears old, model 98TR7SW-ENT-VSF, few buttons are heavy to response. Any suggestions? I can open it by myself if necessary, thanks, Neno well open it up and see that all the ...

Buttons' contact pads wear out, but sometimes it's dust inside. You can try opening the remote, carefully lifting out the rubber button assembly, and washing it in clean water - the rubber pad only! -

...buttons would wear out first. the piece of rubber that make the connections must be coated with a conductive substance. maybe it wore off? It does work if you remove the front cover and the rubber ...

...buttons wear out? All other buttons work with the exception of the top right button! It sounds that your remote control needs cleaning. Check this site for more details. You can see details about how ...

...wear. The construction of most remote controls are pretty simple. Remove all visible screw s and batteries and pry sides apart. Buttons are usually a single layer of rubber with a conductive pad ...

...years. It has gradually become more and more difficult to use. It takes multiple "pushes" on the buttons to get it to function. Turning the TV on, for example, may take 6-8 pushes/aims. Pausing, ...