...private, I am guessing you have to get into the DSL router and set a static route to point to let it know about both of the the ar410 networks on each interface. Keep in mind it might not understand ...
...know how to do this could you help me? http://www.netopia.com/support/hardware/technotes/NQG_025.html Server List (Port Forwarding) NQG_025 With NAT enabled, the IP addresses of nodes on your LAN are ...
...private IP address is statically set. Your public IP address is obtained from your ISP and is what other users will be connecting to. You can not manipulate your public IP address so if your ISP is ...
...enter the Service Port. If you don?t know how to use Private and Public port assignment, then just enter the same port number in both fields. Configure the Schedule as needed and Apply your
...for the rest of your private network concurrently. Of course you need at least (2) public IP addresses in the same subnet as well. Hope this helps. Let me know if you need better clarification. ...
...know the ip and port of that server. 1. Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address ...
...know if this helps anyone else. Obviously, you have to enable these ports in vista's firewall as well. It was so frustrating for 2 weeks!!!! There are several reasons why this is happening. Most ...
...public ip address is 24.39.45.10. In a browser window from a remote location, you enter the URL http ://24.39.45.10 The request will be sent to your router on port 80. Your web server will not have ...
...private ip or whatever the case may be and set it. This is what i normally do for people!!! option two: (which i havn't tried but think might work) ****delete**** wow you know what, this post is ...
27 questions posted
Usually answered in minutes!
145 Questions
107 Questions
84 Questions
39 Questions
21 Questions
