Brinkmann 810-2300-B Grill "burners not" Questions

...burners not working The front burner light is very low and when turning on the back burners, they don't light, but shut off the front burner Front 2 burners light properly but back burner does not ...

...not even with a gas lighter. It appears that both burners are connected to the same line. Why would the right burner light just fine and not the left? Can anyone help? It's possible the burner is ...

..... Half of the burner does not light on a 3 burner kenmore grll If the burners being most Kenmore grills use iron burners my guess is the burner is rusted you can buy replacements at sears parts ...

...burners. This slot in the burner will corrode shut and not allow the flame to move from the left to the right side. Sometimes you can scrape out the corrosion, and sometimes you can not. If you can't ...

...burners not working right. Maybe screws need adjustment. the burners need cleaning remove burners put them clr or clean out burner holes with a paper clip screws are air gas mixture best left as they ...

...Not geat, but no blow torching effect. However, over the last few months I can no longer use all burners. Problems began where two burners would work, but when turning on the third, all burners would ...

...Burners will not Jenn-Air Model 720-0061-LP. Burners will not light properly, will only lite on one side. I've cleaned every hole in each burner, worked for a short period to time, can bang on the ...

...not the burners. If I light either the two left or the two right burners and they get to 500 degrees, as soon as I light another burner the temp drops. Hope you can help Thanks Mitch Could it be the ...

...burners plus side burner and a rottisserie burner , which does not work. It is approx 5 years old and I have never used the rottisserie till last week. I have tried to light it up , but there is no ...

...on burner check burner is not split . blow burner out with air line or vac inside could be blocked . clean off all soot . replace burners and see how flame looks should be nice and blue not yellow