Brinkmann 810-2300-B Grill "burners" Questions

only left side of burners working i have a 4 burner gas grill and the flames only come out the left side of all 4, i cleaned all the burner holes If you have the Cal Flame burners that are straight, ...

Front Burners very low back burners not working The front burner light is very low and when turning on the back burners, they don't light, but shut off the front burner Front 2 burners light properly ...

...not light on a 3 burner ke... Half of the burner does not light on a 3 burner kenmore grll If the burners being most Kenmore grills use iron burners my guess is the burner is rusted you can buy ...

I have a stainless steel Ducane BBQ with five burners plus side burner and a rottisserie burner , which does not work. It is approx 5 years old and I have never used the rottisserie till last week. I ...

...uneven heat I have a new 4 burner propane grill from sams club members mark. When I light all 4 burners, the two center burners get hot, 500 + degrees, but the outer burners only get to 350. I ...

my turbo built in bbq has 4 burners. what do the my turbo built in bbq has 4 burners. and they aren't lighting fully. One side on each lights but not the other. What do the screws on each burner do. ...

...from the ignitor but the burner will not light, not even with a gas lighter. It appears that both burners are connected to the same line. Why would the right burner light just fine and not the

...middle burner. At any rate, indirect is harder with the two-burner because of the placement of the burners. You can try to put some 1" thick ceramic bricks directly on the flavorizer bars in the ...

I have a char-broil 3 burner grill that is about 6 years old. It has 3 circular burners. The amount of gas now getting to the burners is equivalent to low even when the dials are on high. Do I have a ...

the burners on my Master Forge barbecue are having issues, when i turned the burners on they light up ok, but the burners on my Master Forge barbecue are having issues, when i turned the burners on ...