...help, thanks Tim I found the wiring diagrams and schematics for my Thermador. It was in a plastic sleeve, taped to the inside wall of the range, near the bottom right. Pull out the bottom ...
Question about Microwave Ovens
...De Dietrich microwave. I have a problem as for the past week I have been able to smell a burning plastic smell coming from the control panel when microwaving something. I have checked as to
...a 10yr old ge microwave--was heating up food when it started making a loud bzz noise and then burnt plastic smell came from outside of the microwave and it didn't heat up food. It was working fine ...
tried to ignore it, but the more I tried the more I noticed it ARGH! Ok, I noticed that there was a plastic (saran wrap) type covering over the whole interface of the control panel. I definitely could
...called a spatter shield) is usually about the size of a playing card and often held in place by a plastic rivet. It can be fragile, and the metal edges of the oven behind it can be sharp, so be ...
Question about Samsung Microwave Ovens
...not just adhesive (which is pretty tough) but by ten (10) little fingers which go through to the plastic door panel it's mounted on and which have to be pried up before starting to remove the ...
...The waveguide cover is usually about the size of a playing card and often held in place by a plastic rivet. Quite often this is due to grease or food particles stuck to the inside of the oven ...
...you to be injured. You must use an insulated tool such as a screwdriver. Be sure the handle is plastic or has a rubber sleeve. Never use a wooden handled screwdriver, as the wood can absorb ...
...You have to replace it from the inside/top of the microwave compartment. You have to pop a little plastic button out, and turn it. The direction of turn to remove it are on the stirrer cover
211 questions posted
Usually answered in minutes!
196 Questions
78 Questions
59 Questions
47 Questions
42 Questions