Frigidaire GLWS1339C 3.0 Cu. Ft. Top Loading Washer "level" Questions

leveling a washer tub how to do so i need to know how to level a washer tub first get a level. second, some have self leveling rear legs, just lean the machine forward and set down slowly. the rear ...

how do you know if the water level sensor is working Try setting the level to low...with the lid open, you can watch the water fill. Once the water gets to the proper level, it should change to the ...

leveling my machine how do you calibrate to level it Place a level on the top of the machine and move down to the feet.The levelers have a lock on them which you must turn counter-clockwise to unlock.

Water level low Washer will only fill to 2/3 level when set to maximum. After it fills to the 2/3 level, the level reset button can be held to fill washer to the correct level. check pressure switch ...

water level drops during wash/rinse cycle When I use the super water level on the machine, the water level drops during the wash/rinse cycle causing the machine to stop washing and refill back to the ...

the water level never stops, it just fills till it over flows if on auto level select water level eg medium or low depending on amount of clothes this sometimes works dont use auto water level. If not

whirlpool model awm293 water does not turn off when level reached in front loader the parts that control the water level is the water level switch.it's with a hose connected to tub and the water level

Water level does not work. When filling up for washing the water overfills and simultaneously empties when the level reaches the top. This happens regardless if I use Auto or one of the levels. It ...

washer,will not stay level? Please tell us what you have tried so far? Do you mean that you have levelled it with the adjustable feet, and that the feet somehow change and it becomes not level? When ...

...high. It has been getting a little lower each year. Manual does not show any adjustment for water level other than the normal low/med/high on from - seems there should be an adjustment screw at the ...