Frigidaire ATF6000ES Front Load Washer "washing machine tub hanger" Questions

...machine is level Clothes seem to gather at back end of tub Washing machines are made to have there main tubs hang from spring hangers. If one of your rear springs have come undone it would allow the ...

...Washing Machine. We washed a "cathouse" that my daughter made and didn't realize there was coat hanger wire that helped to support the roof. After washing, we found one piece of coat hanger halfway ...

...machine, there is a drain hose from the tub of the washer. If you can pinch this off with a pair of pliers or a clamp, you can keep the water in the tub, while you remove the hose from the pump and ...

machine has been used for washing heavily soiled or greasy clothing; the hose to the pressure switch could be clogged at or near the tub end. Empty the tub, pull off the hose, and run a coat hanger up

...whatever is stuck around shaft and tub Remove the cabinet. Remove the plastic ring snapped to the outer tub. Use a wire coat hanger to remove the garment. Replace the plastic ring and the

my GE wjrr417og2ww the tub seems lose and with heavy loads the washer is making noise. Has a strut or spring come off? make sure basket is tight to tub/ transmission (hub nut is not loose). remove ...

have to fish it out with a magnet which is difficult because the tub is steel. The other solution is seperating the inner tub with the outer tub. I have had luck with a clothes hanger and som patience

forgot to remove shipping bolts from the washer. did 2 loads. did i do any damage to my brand new frigidaire? Probably not, but I bet it did a little jumping around and floor vibrating. Those bolts ...

washing machine drum banging on spin cyle Sometimes the drum may unhook or break one of it's hangers. This will cause the tub to lean.. When spin cycle comes on the weight of the wash load will shift ...