perfectly level side to side and frotnt to back. After leveling, check the feet on the bottom and see if one is bouncing on spin with a load. Adjust the bouncing foot down until machine stops bouncing
Question about Frigidaire Washing Machines
washing machine is bouncing around the room During the spin cycle, the washing machine is moving around...almost like it bounces. We had a Whirlpool person out to check in Sept, told us that we hadn't
the washer bounces during spin cycle the washer bounces when it is in spin cycle Front loaders don't like small loads. There's not enough clothing to settle around to balance it. Only do large loads.
Question about Frigidaire Washing Machines
...washing machine makes a loud thumping and banging sound during the high speed final cycle. The washing begins to shake pretty hard and bounces around a bit. This only happens during that spin cycle, ...
Question about Kenmore Washing Machines
...spin cycle started. The machine began to bounce around so I stopped it. When the load was balanced I tried to restart the drain cycle with no success. I restarted the wash cycle in various places on ...
...bounces when spin starts and seems nosie new washer bounces when spin starts and seems nosie during spin cycle. is this normal? is there a fix? model ftf530fs If it is brand new are the transit bolts ...
washer smokes in last spin cycle it was bouncing very bad so i replaced the dampers and now it still vibrates a little but it smokes from inside on the last spin cycle washer smokes in the last cycle
...washer goes to the Spin cycle, the machine goes out of balance. Basin bounces back and forth, even when empty. The stem is bent or fractured or the bearing is shot. This is a rebuild job for a
Question about Frigidaire Washing Machines
spin while washing, it's more of a rocking back and forth. As far as the spin cycle. If it's not reaching full speed I bet you'll notice that it's not doing the full cycle because the load is bouncing
...when in spin cycle ,it vibrated shakes and bounces all around. It really does not matter load size Whirlpool Fabric Sense System check the tension springs maybe replace all four regards ...
3,279 questions posted
Usually answered in minutes!
1,146 Questions
974 Questions
650 Questions
256 Questions
168 Questions