reset? F&P machines are very simple mechanically, but quite complicated electronically. If you have no lights on the display and power is getting to the machine the most probable cause is that the
Question about Electrolux Washing Machines
...power light and door light is on) but the LED screen is blank with no other lights on consol. Therefore machine will not start. Looks like it may have started when I turned it on as towels are a bit ...
Question about Amana Washing Machines
...of the wash cycle is there a reset button? Offbalanc The only reset is to unplug the machine from power for about 5 min's and if that fails you may need to replace the washer timer control
...reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it ...
Question about Electrolux Washing Machines
...power, will always reset anything. However I suspect that this isn't the problem sounds like you controller board has failed? You either need to obtain a service manual and try DIY or better yet ...
...or sound and have tried to hold down the Power and Start switch for three seconds. Is there a reset switch? Afraid ypou have to purchase a controller module to start with - it has failed
Question about Samsung Washing Machines
...the power its on all the display lights on but it won't start. Can you help? Immediate suggestion would be to unplug it. Plug it back in and see if it resets. Good luck! Circuit is fail replace ...
Question about Washing Machines
...power company is sending you the right Voltage. 2nd Make sure did not trip one side of breaker, Reset if needed. 3rd Pulling electrical circuits down could mean Start & or run capacitor is failing or ...
Question about Fisher and Paykel Washing Machines
...power and wait and hold for 15 seconds let go this will reset the board and clear any faults detections from before {where it came from} all machines are different in the way reset it applied some ...
Question about Washing Machines
...you will need to pull the power and shut this unit down for 5 minute.. if the unit continues to flash after this reset, you will need to replace the control board/timer in this case. it has
3,279 questions posted
Usually answered in minutes!
1,146 Questions
974 Questions
650 Questions
256 Questions
168 Questions