Question about Hotpoint Washing Machines
water , do you need to remove the concrete anti vibration block ,mounted on the top of drum ? thanks in advance Just leave that concrete block there, it is to prevent your tub from taking off skywards
...WASHING MACHIN, MAKING TOO MUCH VIBRATION WHEN IT COMES IN DRY MODE, I REMOVE ONE CEMENT BLOCK FROM INSIDE. Hi jill_perigo I have a couple of question, 1. did you remove the block? 2. is the machine ...
...washing machine bumps and bangs out of balance with no visible problems (top and front removed , no error code) I had a front loading washer (not Kenmore) that bumped, banged, and walked all over the ...
...on the third it jumped and moved a lot. Have I erred or is it for some other reason? The machine is on a tiled floor, on concrete and is level. if its a new machine did you remove the shipping ...
...washing machine to rinse it starts fast and jumps, it was only a problem at flushing and not always, but now jumps to the start if its a new machine have you removed the transport bolts or if its not ...
just set up machine-leveled it,on concrete floor,washer vibrates across floor on spin cycle. Can this be due to shipping bolts on rear of machine? It is if they were not removed.
...concrete block but would not be able to remove it. I have bought the machine in Spain and have no instruction manual. The concrete blocks are vibration dampers and must remain on the machine or it ...
...concrete basement floor. The tube can't handle the water volume and it overflows immediately. I tried clearing it out with a broomstick with wire on the end...I got a bit of dryer lint out, but it ...
washing machine I just purchased a new samsung front load washer, I have levelled it perfect and it still wobbles out of control when it spins. Confirm you've removed the transit bracket that ties the
3,279 questions posted
Usually answered in minutes!
1,146 Questions
974 Questions
650 Questions
256 Questions
168 Questions