Frigidaire ATF6000ES Front Load Washer "drum unstable" Questions

Ad

Question about Frigidaire Washing Machines

1 Answer

Drum Speed - Unstable The drum turns but will not reach high speed because it is banging around. Loud knocking. The spin bearing or basket drive may be worn. When these components are worn-they ...

Ad

...drum moves more. this makes the washer unstable and vibrate. also but more pressure on the springs that keep the drum up, they are easy to change, access to the springs is at the top the sockers are ...

Ad

Question about Hotpoint Washing Machines

1 Answer

drum seems very unstable too! Could this be the drive belt? Is this fixable or am i looking at a new one? With thanks Sounds like the main drum bearings have failed. Spin the drum by hand from inside,

Question about Hotpoint Washing Machines

1 Answer

...drum unstable.and if you keep using the the machine,drum get demaged.mostly all front loading machines are like that.the test is,open back cover check if there is rust on the centre shaft,that means ...

drum - it may have corroded and become unstable - we can usually detect this by opening the drain below the drum and empty it into a Tupperware - examine the water and look for small black fragments -

Question about Miele Washing Machines

1 Answer

...unstable....What I mean is... if you put a blanket in it and the blanket is on one side of the drum, the computer decides that if the machine spins, the centre fugal force or whatever they call it, ...

Question about GE Washing Machines

1 Answer

...unscrew and make the machine unstable yet again. Might take a little time but it is imperative, not only for good operation but it also saves damage to the drum supporting mechanism. Good luck! John ...

Question about Whirlpool Washing Machines

1 Answer

...HAVE A PROBLEM IN THE CONTROL BOARD, OR MORE LIKELY THE COUNTER WEIGHT OR BALANCE STABLELIZERS ARE BAD? THEY ARE WHAT BALANCES THE DRUM IN THE WASHER. AND CAN CAUSE AN UNSTABLE LOAD AND ERROR

Question about Frigidaire Washing Machines

1 Answer

...Drum Motor. LE LOCKED MOTOR ERROR ? The connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY. ? The electric contact between ...

Question about Washing Machines

1 Answer

...drum in up and down movements, does it feel unstable? If it does: - Either the shocks need replacing (Not Common), or the Spindle or Spider as it is referred to is broken, seek replacement of these ...

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

3,279 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...