Optoma ML300 Mobile LED Projector "wire 3 plug white black" Questions

3 and com -4 on the other ..thankyou for the input All flat screens use a backlight (or sometimes 2 backlights). Going by the colours you mentioned, i'd asume it's those you are talking about. If each

...wire. Once thoses 6 connectors are removed, remove the 2 phillips screws holding the AC power plug to the case. Also remove the 4 3/16 posts for the VGA and DVI ports. Next remove 4 screws, 2 screws ...

...wire At my place of work, we've had several blown capacitors on this monitor. You can see the capacitor bulging once you tear apart the monitor. Radio Shack 1000uF is the replacement, and only costs ...

...wire that plugs into the green port on your sound chip / sound card and into a 2.5mm jack on the rear of the monitor, can get one of these dirt cheap from maplins/ radio shack Thank you for ...

wire from one end. Radio shack sells both. Part number 272-1030, were in stock at local store. Thanks Again Delphiuser - you saved me buying another monitor. I have the same problem with my 17 proview

...wire, this 3-A insurance. Please stop the PF801 power-measurement, measurement inaccurate. Understand how maintenance of electronic maintenance steps friends 1 : BenQ LCD can switch planes normal (no ...

...3 screws out of the bottom rear edge (these hold the front trim),and the 4 big black ones at the middle of the back the the trim then unsnaps. {Be aware of the small ribbon to the power button board ...

...3 sec... then it goes black...? PLEASE HELP IM POOR!!!! http://boredprojects.blogspot.com/2008/06/hp-vs19d-fix.html It seems to be a capacitor problem. Follow the link above. I have the same problem. ...

...3 amps and is quite happy at 18 or 19 volts. By the way, the white wire is positive and the black wire is negative. Don't worry about those four pins on the plug. If you look on the case of the old ...

...3 wires(red/white/black or red/yellow/black). Those will lead to the fans from the mainboard. Occasionally the fan will spin but the tachometer lead will stop reporting the fan status and the ...