All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater "forced air heater wont ignite" Questions

Ad

...forced air furnace it ignites fine but the blower wont kick on ignites fine but theblower wont come on main fan should come on once furnace has heated up to supply hot air to the house. make sure ...

Ad

Question about Coleman Heating & Cooling

1 Answer

...wont ignite all components of my furnace work except the pilot light wont ignite the burners, this is an older electronic ignition furnace made by carrier. unless you are well trained in ...

Ad

Question about Coleman Heating & Cooling

1 Answer

...wont fire it is getting gas and combustion air. the electric ignition dosent come on. and the red light blinks 7 times. what could the problem be? Check inside the door panel next to the wiring ...

...heater and it just wont fire and run. I have spark to the new igniter and can smell propane but it wont begin to fire and run. These models require electrical power to run the blower fan. When you ...

Question about All-Pro Heating & Cooling

1 Answer

...wont ignite if does smokes take top coveroff works fine Must be starving for air then, check and make sure it is clean and unobstructed and air can get in around the finns to the flame. Is the blower ...

Question about Coleman Heating & Cooling

1 Answer

...heater turned upside down and added white gass to dome wont light in fact splatters fuel what am i doing wrong sounds like your feed tube might be partially plugged, or the orifice, you will need to ...

...air forced into the combustion chamber. If the heater will not start with the top cover removed, try adjusting the pump pressure, or replace the nozzle. This may not be very scientific, but the ...

Question about All-Pro Heating & Cooling

1 Answer

200T would burn sat all summer went to use it wont light During start up, a hot surface ignitor glows brightley to ignite kerosene, check to see if it is broken

Question about All-Pro Heating & Cooling

1 Answer

I have universal 150,00 btu/hr and it wont ignite, the nozzle sprays a mist but no spark? You may have a bad transformer that sends the electricity to the spark plug. Have you tried a new plug?

Question about Reddy Heating & Cooling

1 Answer

wont ignite Clean or replace nozzels and filters. Check spark plug or ingiter for wear (replacement may be needed). The manufacturer offers service manuals on there online website... www.desatech.com

Not finding what you are looking for?
All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater Logo

378 questions posted

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...