Whirlpool MH1150XMQ Microwave Oven "metal rack sparking" Questions

metal item (forks-spoons or oven rack) is touching the outer wall of the microwave. That will cause sparks. If all that is OK then there is usually a metal fan type blade in the microwave top called a

...metal inside the microwave. Do you have a rack inside on a revolving tray? On my microwave, if the foot of the wire rack is not on the revolving tray, it will spark against the floor of the oven. ...

...safe paint to touch up any bare metal spots. Rack Support If the microwave is sparking or arcing near one of the rack supports, remove the support, repaint any bare metal, install a new

...rack)? Thanks. The problem that you are having is that the magnetron inside the microwave is shorting out to ground and it will find the shortest path to reach whatever has metal in it. Replacing the ...

...safe paint to touch up any bare metal spots. Rack Support If the microwave is sparking or arcing near one of the rack supports, remove the support, repaint any bare metal, install a new

...metal rack rest on the plastic holder You will need to remove the rack and all the rack holders. Any grease or carbon arcs will have to be cleaned thoroughly, and if the metal is charred or damaged, ...

...Rack supportIf sparking or arcing in your microwave is near a rack support, any exposed metallic area can be covered with a microwave cavity support. It is also recommended to replace the rack ...

...metal rack in it (the one that came with it). Now this week, it sparks regardless and actually starts a fire. I have flame marks up the side of the microwave. I've tried wiping it down and washing it ...

...Rack supportIf sparking or arcing in your microwave is near a rack support, any exposed metallic area can be covered with a microwave cavity support. It is also recommended to replace the rack ...

...metal rack. Pry off plastic tab. Clean up burn marks with sand paper and touchup paint. Order a new rack clip. Also clean any burn residue off rack. MOST IMPORTANT: After the repair, do not put the ...