Whirlpool GHW9400 Duet Washer "spider tub" Questions

...tub unit (the spider arm is attached via machineshop). You will need c-clip pliars to DIY or have a serviceman install it, and be sure to label the clips for when you put them back. This happened to ...

...spider arms have failed. It is an expensive repair since the wash tub and outer tubs need to be replaced and the washer has to be torn completely apart to replace them. Check your warranty and see if ...

...and inner tub should rise and fall as a solid piece. If you feel a separation the bearings need replaced or the spider assembly has broken. Only a complete teardown can tell which. Hope this

...tub should always spin true. When it wobbles it is a sure sign that the suport arms or spider arms are broken. It is an expensive repair since the wash drum, the outer plastic tub and the door seal ...

...up and down,if you can do this,then the drum spider trunnion is broken in behind the tub and the tub is loose which will require a new tub and trunnion as they are not sold separately at about ...

...Spider arm is not cracked and broken- which means disassembling it. That is what happened to us. It's actually attached to the tub itself which is covered under lifetime warranty, so they sent us a ...

...out. reach inside drum that turns and try to move it up and down. If there is any movement the spider at the rear of the drum is broken. Will need inner drum and outer rear tub with bearing and

...tub with the washer empty. Place the palm of your hand at the 12 o'clock position and push straight up. There shouldn't be any play in the spin basket. If you can feel the basket wobble up and down, ...

...cycle like its out of balance Check the inner drum by lifting up and down . If it moves at all in rlation to the outer tub then the spider bracket on the back of the inner drum is broken, Major