Whirlpool WFW8300SW "f28" Questions

whirlpoo; wfw9200 F22, F28, A17 A27 error codes 6 month old whirlpoo; wfw9200 with these F22, F28, A17 A27 error codes f22 is a door lock error and f28 is a commication error you still have warranty ...

I have an F28 error what is wrong I have error read out f28. What is the problem? As far as I know F28 error code means - SERIAL COMMUNICATIONS ERROR/MOTOR CONTROL UNIT ERROR. Caused by either a ...

it gives a F28 code. What is that? it gives a F28 code. What is that? F28 is a motor controller error... Try unplugging the machine for a minute or two, then starting it again. If no good, you can ...

I washed a large load in our Whirlpood Duet Washing Machine and it stopped with a flashing F28 code. I unplugged it for 5 minutes and it still will not run a cycle without stopping with a flashing F28

it starts and then stops and then F28 flashes error code F28 flashes when machine stops ...

F28 error / water starts to fill then quits in 15 sec's F28 is a communication error which usually means there is a connection that has come loose.Check the wires on the control board. Have a Maytag ...

whirlpool f28 error code and door lock light When starting unit, door lock latches but door lock light does not go on and washer sits and does nothing. Eventually it powers down and door lock relay ...

code f28 Hi, the error code F28 means one or both of these parts are bad. Motor Control Unit (8540135) Microcomputer Machine Control Unit (8540788) It would be a good idea to order both, as both ...