...water inlet hoses kinked? Straighten the water inlet hoses. Are the water inlet valve screens on the washer clogged? Turn off the water and remove inlet hoses from the inlet valves in the back of the ...
...inlet filter may be plugged. especially if your water coming into your residence is not filtered. You may have a buidup of scale deposit, rust or anything like that. This inlet filter is in the back ...
...water tight. Also check the filter itself - generally located behind a panel at thefoot of the machine.Some are obvious like little square hatches andsome are hidden behind the trim panel at the foot ...
...inlet pipes, none. Took off back of machine and unclipped grey hose, no blockage, Took off large black hose from main machine, goes into the drum, big black hose had a sock inside. took away sock ...
Question about Whirlpool Washing Machines
...water to run out. On some of these top loader models there is a screen in the wash tub under the spin basket. You can tell by removing the inlet hose to the drain pump and feeling up inside the wash ...
...inlet hoses that connect the water faucets to the washer. There is a mesh screen inside the hose. Make sure it is not clogged.Uncurl the water hose if it is wound too many times, restricting water ...
...inlet valve, the sensor that checks the weight of the drum + water, or the wiring or wiring harness to either one of these items. The computer control board can also fail to "hear and respond" to the ...
water outlet default need to find the inlet/outlet filter Outlet filter is located behind the little square door at the bottom of the machine. The inlet filter is in the end of the inlet hose. It is ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions