Question about Whirlpool duet Washing Machines
Washing Machine "Walks" Across the Floor, is there anything i can do to fix it? I HAVE THE SAME PROBLEM. THE WASHER IS ON THE 2ND FLOOR, FRONT LOAD WASHER WHILPOOL, AND HAS BEEN LEVELED SEVERAL TIMES.
...walks across floor Have you checked to make sure the supports are OK? Is your washer making loud noises during spinning? If so, the basket drive may be broke. i have a kenmore 500 washer,model # ...
...across the floor, then when I found it the door was popped open. Now the door won't close. I don't get any error messages, but the panel flashes. I read about pulling a door latch release, but don't ...
...WASHING MACHINE ? WHEN IT SPINS IT WILL WALK ACROSS THE FLOOR ? THE MACHINE IS LEVEL AND THE LOAD INSIDE IS LEVEL HOW DO I FIX IT the washer is not getting a balanced load need to adjust the clothes ...
Washing machine walks Despite leveling the washing machine, it walks across the floor.The floor itself is a new garage floor with a very slight slope as required for proper drainage. The walking ...
...washing machine I continually have this machine walking across the floor from vibration as a result of an unbalanced load. I have continually leveled the machine with a spirit level, but still dances ...
Question about Whirlpool duet Washing Machines
...washing machine walks across floor during spin cycle washing machine walks across floor during spin cycle. I have leveled the machine and it still persist in walking. Did you set the back feet before ...
...walks across the floor even with sheets in it. Not sure what to do any more. It is always out of balance. FIRST OF ALL SCREW THE FRONT LEGS ALL THE WAY DOWN THEN TILT THE MACHINE UP FROM THE BACK ...
...washing machine AAV7000AW When in spining cycle, the barrel begins to move all over banging the washer across the floor. I don't even know what to look for. Help. Hello calmtouch, You said, When in ...
Question about Whirlpool duet Washing Machines
...washing machine that is not level will walk and vibrate and really shutter on the spin cycle. I would try to level (using a level on the top part of the machine that is flat, if there is such a ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions