Whirlpool Duet GHW9150P Front Load Washer "washing machine tub wont center" Questions

...washing machine, then I smelled what seemed like an electrical burning smell. Noticed the washer had drained but did not spin. When I attempted to turn the spin cycle on I hear a humming sound but no ...

...washing. To check the drain pump filter you will need to do the following: Unplug the washer, remove the 3 screws that hold the lower panel on the washer, they are on the bottom lip of the toe panel ...

...washing machine will not drain. There has been a message blinking (sud),but it wont drain and doesnt even sound like its trying. This is a fairly new washer(under a year old) I disconnected the power ...

...wont lock and starts to flash ''DL'' and then ''F''. Sometimes it will work but not all the time. Thanks for your help Whirlpool duet front-loading washer mod# GHW9150PWO The problem is a door latch ...

...wont spin/drain whenever there is water in the tub. thing is it will spin whenever there is no water in the tub. What is wrong with my washer.......could it be the water drain pump? Call GE answer ...

...washing machine, it's under the tub, going from the motor to the center. If you have a dryer, it goes from to the motor and goes the while way around the drum. You can check from the rear. Remove the ...

Wont spin or drain Whirlpool, and other frontloaders have an inherent problem- They all have shaft seal and bearing problems. When water and corrosive soap residue sits and dries aroung the tub shaft

...wont start the next cycle. I have been unplugging the unit to reset it and i works fine for a while. what can i do so this does not happen any more ld IS AN ERROR CODE FOR LONG DRAIN. The computer ...

...wont agit Washers have (dogs), these fit in like a gear.at the bottom of the tub. They are made of plastic and wear out, when this happens the washer won't agitate Usually the center that sits in the ...

...wont aggitate My Whirlpool WTW6600 had the same problem.  The tub no longer floated up and down on the center shaft, so it only spun, not agitated. You must remove the tub (with some effort) and ...