Whirlpool Duet GHW9150P Front Load Washer "washers bearing problems" Questions

When the washer spins, it is making a terrible loud noise. The washer has always vibrated, but this noise sounds more like a bearing to my husband. It also smelled hot at the end of the cycle. If the ...

While draining out soap water it sounds very loud, like accelerator applied vehicle You either have something in the pump or your spin bearing is going bad. If it accelerates and gets slowly louder it

Whirlpool Duet WFW9200SQ02 - high speed spin extremely loud! I have a Whirlpool Duet washer (front load - model WFW9200SQ02) that I purchased 2 years ago and over the past several weeks, during the ...

Spots on the clothes I wash my shirts and items as specified with liquid Tide, and a diluted solution of Downey, but most of the cotton shirts come out with spots all over them. IF YOU ARE USING ...

my washer makes a LOUD noise when spinning, has done this since new but is getting ubearable. my washer is about 4 years old. The problem here is with the rear tub bearing. Unfortunately the bearing ...

creaking noise when washing cycle. is this the bearings? yes this model has a real problem with the washer drum bearing. there are many class action law suits on this, when it gets really bad grease ...

whirlpool ghw9100lw2 bearing repair starting to make a noise like a jet taking off. From what I have read it is the rear bearing and only way to repair is to replace the tub which has a bearing on it.

Whirlpool duet front load washer banging Loudly during spin cycle as if off balance More than likely the washer tub bearing is worn out, this happens due to seal failure and soapy water getting into ...

I have a build up of mildew on the rubber seal inside the washer door-I realized too late the door has to be left open when not in use. Now the problem is how to get rid of the build up-I've tried

The black belt in the back of the washer comes off. The black belt in the back of the washer came off and we put it back on. It became apparent that we needed a new belt after having to put the belt ...