Whirlpool Duet GHW9150P Front Load Washer "using wet dry vacuum drain" Questions

...wet/dry shop vac and pull a vacuum on the drain hose. If you do not own a shop vac, have some towels ready and place them around the drain pump clean out trap. Crack the trap cover open and allow the ...

...wet/dry vac and vacuum out any and all water once remove feel free to unscrew cap counter clockwise and pull out cap it will have a short catch area you may discard any objects and rinse off. then ...

...wet/dry shop vac to pull a vacuum on the drain line and drain the wash tub. This will minimize any potential mess you may have to clean up. Replacement parts (if required) can be purchased at any of ...

...wet/dry shop vac, remove the drain hose from the standpipe at the wall and pull a vacuum with the shop vac. This will empty the wash tub, pump and drain lines. If you don?t own a shop vac, grab a ...

using a wet/dry shop vac to pull a vacuum on the drain hose to try to pull as much of the water (if any) ot of the wash tub BEFORE opening the door. NOTE: Is your washer displaying any error codes? If

...wet/dry shop vac, remove the drain hose from the standpipe at the wall and pull a vacuum with the shop vac.This will empty the wash tub, pump and drain lines.If you don?t own a shop vac, grab a bunch ...

...wet/dry shop vac to pull a vacuum on the drain line and drain the wash tub. This will minimize any potential mess you may have to clean up. NOTE: For future reference, the error codes are not listed ...

...wet/dry shop vac, you can minimize this mess by taking the drain hose form the standpipe at the wall and pulling a vacuum on the line to drain all the water. There's about a gallon of water that ...

...wet/dry shop vac to pull a vacuum on the drain line and drain the wash tub. This will minimize any potential mess you may have to clean up. Replacement parts (if required) can be purchased at any of ...