Whirlpool Duet GHW9150P Front Load Washer "timer light flashing washing" Questions

timer light keeps flashing The timer light keeps flashing. The motor is running, but the drum is not spinning. The door is locked. The other lights are on steady, except the timer light that keeps ...

...is water in the tub and the timer light is flashing. I cannot, however, get the machine to resume the cycle. What should I do? unplug, let sit for 2 min, replug and try to put into drain/spin ...

...timer started flashing. I also noticed all the lights on the left side ("add garment," "rinse," "door locked," etc) were not lite. I pressed pause cancel and the machine drained the water and allowed ...

...timer keeps flashing and I cannot get it to lock and therefore it will not start Unplug the appliance from power, or trip the circuit breaker and cut power to the appliance for about five minutes. ...

...light flashing normal casual It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full ...

...Duet washer, model GHW9100LW1 Cycle selecter lights flash washer will not start. It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to ...

...timer section. All lights were flashing. Hi, You don't say which F code is showing but the problem you discribe could be a FdL or a F11 code. (If you open the panel under the door, 3 screws at the ...

light is flashing but washer does not start when I press HOLD TO START button. Door is closing correctly. It appears your timer/main controller/CCU has failed in this instance. For replacement parts -

...& hear same contacter click on the the board when the Start button is pressed It appears your timer/main controller/CCU has failed in this instance. For replacement parts - head on over to ...

...light flashes door open stopping the cycle going any further please can any one help. hi, The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply ...