Whirlpool Duet GHW9150P Front Load Washer "stops makes clicking" Questions

The cycle stopped with 2 minutes left. It stopped spinning and had an inch or so of standing water. It was making a clicking sound. I hit the pause button and it would not cut off. I unplugged it and ...

...makes a fast clicking sounds. What's wrong with my washer? If it does not start the clicking noise is coming from the water distribution lever on top of the soap dispenser assembly. Take the top off. ...

...clicking sound and f02 keeps coming up then goes to suds and stops Hi Thanks for using FixYa. F/02 error means Long Drain. If the drain time exceeds 8 minutes, the water valves are turned off and ...

wfw9150ww00 My 3 year old, front loading washer (Whirlpool Duet WFW9150ww00) is stopping after the wash cycle is finished (Sometimes right after the first fill). I am getting error code F8E1. I have ...

makes clicking and grinding noises when I try to start a wash cycle. Once the door locks usually water comes into the machine and it starts to spin, now I only have the noises and no movement or water

The powder detergent is not being released into wash. Yes, it is being poured into the proper place. The water is only coming out over the fabric softener and bleach section. are both valves working? ...

...makes a buzzer noise every couple of seconds. We took the covers off to clean the pump trap. cleaned all the junk out that was making the washer not drain properly, put it back together. Turn it on ...

Stops during cycle. Door stays locked. Won't reset to restart. Makes repetitive clicking sound, like a relay, then gives F dL error message. One technician advised replacing control board (for close ...

I have a duet front load whirlpool washer, I bought it about maybe 8-10 years ago. I'm start to get a error code when I wash on a 28 min cycle spin. The error is 5BR or 56R, it will stop spinning in ...

...makes a clicking sound then time display just blinks with no progression... then the F 06 code shows in display. Help...:) Remove, reseat and reconnect every connector at least 3 times. Remove the ...