Whirlpool Duet GHW9150P Front Load Washer "sound during spin cycle" Questions

...during spin during spin cycle washer made a really load noise like something banging on inside of cabinet stopped cycle & redistributed clothes still sounds like really off balance with a lot of ...

...during spin cycle Occasionaly loud noise during spin cycle. Sounds like a metal bolt, nuts, etc. banging against the drum. drum bearings are gone,it would cost too much to repair,the drum shaft would ...

...during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if ...

...During spin cycle, the tub sounds as if it is hitting the inside of the machine as if it is 'way out of balance, Spin does not cease although it is supposed to per Sears so clothes can be ...

...the washer during transportation. If the bolts are removed, adjust the front two legs to be 1/4 inch higher than the back two. That 1/4 inch will balance the washer during the spin cycle,

...during the spin cycle. Everthing else works fine. Try looking at the solution for loud noise during spin with gray water in drain. This also sounds like the bearings on the shaft supporting the ...

during the spin cycle. I manually switch to the Drain/Spin cycle and change the spin speed to medium and press start. This fixes the problem each time. But it seems not to work on High Spin. It sounds

...sound during the spin/drain cycle. The last two times Ive run my washer it has been making a banging/clunking sound on the spin cycle. Ive stopped it to redistribute the items (towels) yet it ...

during spin cycle. The washer operates normally during wash cycles. When the spin cycle starts it sounds like the inner drum is banging on the inside of the outer drum. I have checked the springs (top