Question about Whirlpool duet Washing Machines
size of the gasoline cap on your car. Turn this cap Counter clock wise (CCW) and remove it. Inside the housing you may see derbish (pins, screws, strings, buttons, hair etc) blocking this 'button trap
Question about Whirlpool duet Washing Machines
...I did not know how to remove the fron to clean it 3 screws a;lone the very bottom of the front panel will remove the panel allowing ou access to the pump anbd clen out area, screws are a TORX 15 ...
...screws, of course they are torx T-20 size.When the panel is removed right in front is what looks to be a plastic can on it's side with a cap that can screw off. It is a trap that comes from bottom of ...
...screws) UNPLUG UNIT. reach your hand up approx six in. on right inside face of unityoull find a manual release for the door lock assy, round tab mounted to bottom of latch assy approx size of a ...
Question about Whirlpool duet Washing Machines
...screws across the bottom front of the panel (torx 15) the lower acees panel can be removed, from there you can gain access to the backside of hte lock assy and manually release it. simply run your ...
...size it will make its way down the drain filter area.. to get to the filter.. you open the front bottom plate..(3 or 2 screws) you will need a few towels before you twist open the filter cap.. help ...
Question about Whirlpool duet Washing Machines
...screws, size #20. After you have those removed, pull the panel downward and pull out from the bottom at the same time, then set the panel aside. Mounted to the floor of the machine near the center is ...
...size of resistense they have. open the front panel 3 screws on the bottom there is a pump clean out plug it is most likly clogged with somthing i am not sure what board you are talking about but this ...
...screws, size #20. After you have those removed, pull the panel downward and pull out from the bottom at the same time, then set the panel aside. Mounted to the floor of the machine near the center is ...
Question about Whirlpool duet Washing Machines
None of my bits will work on the hexagonal screws they used. Anyone know what size of bit I should pick up? Thanks! yes. you should go to a home depot or similar store and get a set of hex nut drivers
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
