shaking is during the spin cycle and you are using the High setting change it to Medium. This may fix the problem and the clothes will probably come out even dryer since the drum is not banging around
drum shakes during spin cycle drum shakes terrible during high speed spin I have a 7 year old duet washer. It started to shake during the spin cycle. It is level and the shocks and springs holding the
Question about Whirlpool duet Washing Machines
shakes bad during spin can shocks and springs wear out how do you replace them? Usually, the damper system has dislodged or misaligned causing this problem. Open the top and shake the outer drum ...
...shaking and result in an imbalance during the spin cycle. Reduce the load's size by removing clothing if the washer's drum is overloaded.2 Push "Start/Pause" to pause the spin cycle and turn ...
shaking during spin cycle and is located in upper floor laundry setting,chances are the floor is weak,and cannot withstand downward force generated during final spin...add an absorption pad under unit
Question about Whirlpool duet Washing Machines
During the spin cycles, the machine makes noise, almost like an airplane ready for take off. It also shakes and "walks". As the spinning increases, the noise and shaking increases. The ...
Question about Whirlpool duet Washing Machines
During spin cycle, washing machine is bouncing around the room During the spin cycle, the washing machine is moving around...almost like it bounces. We had a Whirlpool person out to check in Sept, ...
Question about Whirlpool duet Washing Machines
washer balancing load, during spin cycle wasker shakes and walks Hi, When my washer did that, I found that the shocks that hold the tub were bad... Check out this tip I wrote about the noise and ...
Question about Whirlpool duet Washing Machines
Washer drum shakes excessively during fast spin The problem started suddenly. During the fast spin cycle the washer drum vibrates heavily, with a full load or completely empty. There is also an ...
Whirpool Duet "walking" Sister has this washer and it likes to "walk". Checked leveling and footing, both appear to be OK. Any suggestions? Hi, most of the time this can be a simple as a overload that
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions