Whirlpool Duet GHW9150P Front Load Washer "ring around drum" Questions

...ring has a small tight spring connecting the two ends. the drum does not seem to spin out of alignment. the water leaks out of the bottom of the washer. thanks for any information The spring goes ...

...ring with spring came off. put it back on and has leaked since I have the same problem. I went to get laundry out of the machine and there is plastic piece with coded wires attached and metal tension ...

...ring that stops water from leaking out the door This is not to my credit, but I found it on Fix-it-- here is an online manual ,as txt url wraps around you may have to copy paste it . ...

around the place. Due to regular usage of the washer it may tend to break.This will result in drum hammering sound . To clear this problem pull the bottom front off and check the shocks. Typically the

...drum. Your hand can separate and fit between the rubber rings around the door. On the upper left side where the intake tube is, I had a sock stuck that gave a F25 error. Once I removed it the error ...

...around the edge of the bellows seal until you find a spring in the groove behind the face of the seal. Using a small screwdriver, lever it over the edge of the seal, and slowly work the ring over the ...

stuck in the pump. There were about 8 more knee highs stuck in the rubber ring around the washer door. All is well now! You guys saved me big bucks since we didn't have to call a repair man! Thank you

...around the inside? If its very easy, it BAD should be hard to push by hand. Or try the hand test: If no hammering sound has ever been heard out of this machine, one of the unofficial tests we ...

...around in the balance ring that is attached to the spin basket. There is a balance ring attached to the spin basket that is half filled with water. When the basket is turned by hand you will hear the ...

around the ring until you get to the spring tensioner. With a flat screw driver, stretch the spring to pull the ring out from around the seal. Now observe how the door seal is clipped around the front