Question about Whirlpool duet Washing Machines
...pressure chamber. Give the pressure switch a couple of good taps with the screwdriver handle. Refit the tube and try the machine again. If still doing it, unplug again and follow the tube down. This ...
Question about Whirlpool duet Washing Machines
...pressure switch is fine,roy Hello to test pressure disconnect the small pipe from the vacuum chamber at the bottom of the drum and blow into the pipe and you should hear the pressure switch ...
...the rinse cycle. If we don't add additional water the clothes can stand up on there own from the dirt that is still in them. sounds like the pressure chamber is blocked or the pressure switch is ...
...pressure chamber. Give the pressure switch a couple of good taps with the screwdriver handle. Refit the tube and try the machine again. If still doing it, unplug again and follow the tube down. This ...
Question about Whirlpool duet Washing Machines
chamber that connects the pressure switch to the drum and cleaned that out. I have removed the large black snorkel tube from the bottom of the tub to check for obstructions, nothing stuck in there and
Question about Whirlpool Washing Machines
...pressure chamber or pressure chamber hose.. You need to check the pressure chamber and the small hose that is attached to it for a blockage,. This problem will cause all of the symptoms you have ...
...pressure switch hose goes to an air chamber and this can be clogged with gunge Or maybe there is a hole or leak in the air chamber. After checking that blowing into a pipe attached to the pressure ...
...pressure in the chamber. There is a hose connected to this chamber that runs up to the switch. When the right amount of pressure is applied to the switch it stops the water flow. If the hose becomes ...
...pressure in the air chamber switches the pressure stat and cuts the water off. the things to look for are: gunge in the air chamber split in the pipe. faulty pressure stat to test, get a similiar ...
Question about Whirlpool Washing Machines
...pressure in the chamber. There is a hose connected to this chamber that runs up to the switch. When the right amount of pressure is applied to the switch it stops the water flow. If the hose becomes ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions