Whirlpool Duet GHW9150P Front Load Washer "power not work" Questions

Whirlpool Duet HT I get 3 short beeps when I press the 'Power' button. Power does not come on (it's plugged in and there's power to the recepticle). The only other button that works is the 'Controls ...

...power on, no buttons work except for the controls lock button. I replaced the Microcomputer Machine Control (MMC) and pushed the power button and it turned on but I had to leave so I pushed the power ...

It will not turn on. No power It will not turn on. No power. This is the first time I've tried to use my washer in a few days. I tried to power it on and it won't turn on. The dryer is plugges into ...

...and see if those work..if you have power then your main board or display board may be bad. could be a cosly repair.each board runs 85_- 145.00 for part alone plus labor. not a do it your self

power **** work, power button only beeps after error code it stopped before finishing the spin, now only lock works, power button only beeps, It is a drainage problem. Try cleaning the drain filter by

...work. Yes I checked power, fuse box etc several times. It no work now! You might be able to find a service manual here: ...

...1. Check the drain hose and make sure it is not plugged or kinked. 2. Unplug washer or disconnect power. 3. Check the electrical connections at the pump and make sure the pump is running. 4. Check ...

...power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning! Hope the filter is the problem and good luck! ...

...power for two minutes. If that doesn't work the main control board (CCU) has failed. replace it to fix the problem. Hope this helps. Please be sure to rate my answer. Thank you. EEPROM ERROR A ...

...power only work when door is open instead of closed? I just cannot imagine that the controls pad AND the door switch broke at exactly the same time. Please help! check for a short in the door ...