Question about Washing Machines
...sump pump and its switches. On a washing machine the water level sensor stops the water coming in. The controller knob or circuit board decides when to turn on the pump. 'make model (what it is)' in ...
level of the machine, still getting the same error. Any suggestions? turn mach on spin,if you hear the pump turning normally you have a blocked sump.if the pump hums,you have a jammed pump.the pump is
Question about Whirlpool Washing Machines
...level switch is telling it otherwise. So you said you cleaned the pump trap ? Right? So next, is it draining the water ? If no the pump is possibly broken. If yes possible clogged black ribbed sump. ...
...level that you cannot see the remaining standing water so during the spin cycle it's not able to fully pump all the water out of the clothes. rapportblog7 , and other forum members see these other ...
Question about Whirlpool duet Washing Machines
level in the outer drum--water should flow from the hose freely which will show that all passages are open. That would point to the pump itself. If the pump can be disassembled, see if the motor shaft
level problem. Check water inlet pipe (or shut-off valve), or the outlet pipe, or the pump or pump filter if accessible (check for blockages or foreign objects). Also could be the water valve solenoid
Question about Kenmore Washing Machines
level.Look at this diagram: As you can see the rubber tube from the bottom of the tub allows air pressure to push against the switch till it shuts down the valve and starts the wash cycle. Remedy this
...level in the washer. Sometimes when working on the machine, the drain hose gets moved. Does the drain hose go into a sump pump? PLEASE let me know if this helps or if I can assist you further. ...
sump. Clean it out and look for debris in the pump. Yu can also get this code if the small vacuum looking line that connects to the water level presure switch is clogged. Slide off the small tube from
...level in the tub. This part is normally located behind the control panel and will have a hose or air dome tube that connects it to the tub. On washers that use an electronic control, this switch may ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions