...hot water disconnected because we do not use hot water. thats when the machine stopped working. hook up hot hose and turn on the hot water and dont use hot water control it will not use no hot water ...
...hot water inlet to see if it would run with just the cold but got a flow error signal. Any suggestions try to do cold cycle first without doing warm cycle first The water temperature is not correct - ...
...wash cycle, do you get hot water? If you only get cold water replace the hot water fill valve. If you only get hot water replace the cold water fill valve. If you get neither replace both fill
Question about Whirlpool duet Washing Machines
...hot water after a few seconds Sounds like you've got the hoses switched, and the cold water you're feeling is just what is in the hot water lines until the lines get purged. Try filling ...
...hot water supply to the machine you can only run it with the cold temperature setting. This machine does not have an internal water heater and relies on the hot water supply from the house water ...
Question about Whirlpool duet Washing Machines
...hot water. It worked fine for many years and one day it just quit. It only pulled cold water, even with settings on HOT or WARM, always pulled cold water. What could be wrong? Sorry this answer is ...
Question about Whirlpool duet Washing Machines
hot water and one for cold. Close the manual hot water supply valve and allow the washer to sit and see if it fills with water. If it does fill, then the cold water automatic fill valve is leaking. If
F H? on display Duet washer keeps stopping and beeping with F H on display good luck check for a hot water flow problem; i.e. hot water faucet closed, hot water hose kinked etc.
Question about Whirlpool duet Washing Machines
hot water, no matter if I set the temperature on cold. I turned off the hot water faucet and still the wash comes out warm. What is the problem? these washers sense the water temperature that comes in
Question about Whirlpool duet Washing Machines
...hot and cold water faucets turned on? Turn on the water. Check the household faucets to see if the hot and cold water faucets are turned on. Completely open both faucets for proper fill. NOTE: Both ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
