Question about Whirlpool duet Washing Machines
...high speed spin like always has. The machine is new in Nov of 2013! When I put the machine on the rinse cycle [19 MINS] it seems to work OK on the high speed spin WHY? Consult Warranty from manual. ...
Question about Whirlpool duet Washing Machines
...SPEED IS TOO HIGH- USE A CYCLE WITH A LOWER FINAL SPIN SPEED. The previous poster was right, the spin speeds on front loaders are incredible. You almost don't have to dry! This is most noticable with ...
...high speed spin My whirlpool duet washing machine rattles loudly during high speed spin. It has become progressively louder as it previously sounded like a repeating ticking sound (one tick per ...
speed, which will result in very wet loads. See also: Why HE High Efficiency detergent is required. Is the drain hose kinked or is the drain clogged? Make sure the drain hose is not kinked. Straighten
speed, which will result in very wet loads. See also: Why HE High Efficiency detergent is required. Is the drain hose kinked or is the drain clogged? Make sure the drain hose is not kinked. Straighten
Question about Whirlpool duet Washing Machines
...high-speed spin the door will be unlocked after 3 minuts. Check wireharness connections between the drive motor/Techometer and the motor control unit also check between the motor control unit and the ...
speed, which will result in very wet loads. See also: Why HE High Efficiency detergent is required. Is the drain hose kinked or is the drain clogged? Make sure the drain hose is not kinked. Straighten
...high-speed spin the door will be unlocked after 3 minutes. Potential Causes •Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and ...
Question about Whirlpool duet Washing Machines
...high speed. Please help. If you only have one coat in there, that is a problem. It will notice the unbalanced load and shut the spin down and try to redistribute the load. Try adding a few wet towels ...
...high spin speed during wash cycle. Technician already replaced motor, and spin unit mounted on side. Problem persists. He can't figure it out. Washing maching only two years old, still like new. Just ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions