water valve is just faulty on the back of your washer and will need to be replaced because it's just not allowing water flow into the washer correctly.Here is the valve to order in case it is
water wont stop even if i unplug i had to cut the water supply off yea sound slike you ohave a faulty water inlet valve, stuck in open positon,removet he hoses and repace the inlet valve on hte washer
water when off The inlet valve is faulty and you have to replace it. It is located on the right side of the machine viewed from the rear where the fill hoses are attached to.Turn-off the water supply,
Question about Whirlpool duet Washing Machines
...faulty water inlet valve, not shutting off water supply to machine, it continues to trickle in , in beween washes. you can turn off the water supply between washes see if this helps, and if it does ...
...faulty water valve turning off your water supply will stop the water untill you replace the water valve. Part # AP3128776 unplug unit shut off water supply remove top lid water valve on top left side ...
Question about Whirlpool duet Washing Machines
...water dumps on the floor. You have a faulty fill valve If you want to check which one, try turning off the cold supply only before you go to bed If the washer has water in it next morning it is the ...
Question about Whirlpool duet Washing Machines
...works fine but the fabric softener does not dispense into the tub it may be the water supply to take the fab cond in is either blocked (holes) above the dispenser or the water valve is
Question about Whirlpool duet Washing Machines
...a slow leak into the washer water inlet valve in the machine is either sticky or faulty. get it replaced. till the time, after wash, keep your water valve (which supplies water to the machine) ...
Question about Whirlpool duet Washing Machines
...go to bed If the washer has water in it next morning it is the hot valve that has gone faulty if it is dry then it is the cold one They are easy to change and can be bought from a number of ...
Question about Whirlpool duet Washing Machines
...are allowing water to fill the tub. I am attaching a photo for reference. If either solenoid is faulty, the water inlet valve assembly will need to be replaced, Sure hope this helped and best
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
