...shake my home apart!!! After a bit of reading I go to the issue of the rear 2 bearings in the outer tub that the inner tub is connected to. As it turns out this part is actually under warranty for 10 ...
Question about Whirlpool duet Washing Machines
...door bellow (rubber door boot) from the door frame ONLY and push inside the tub. Leave the other end of the door boot attached to the tub shell. If this is a small front loader, the bellow is ...
...vibration and shaking, will not wring out cloth drum wobbles execessively. Check load distribution, spring and struts first. If it is nothing in there , then it is usually a drum bearing or drum ...
Question about Whirlpool Washing Machines
...wobble side to side or back & front; only movement as allowed by the springs. It seems to be worse on heavy towels or denim loads. We kept thinking it was just "out of balance" loads but it' stood ...
...shake it. Help All washed up in NJ Rear Tub Bearing Replacement This advice is for replacing the rear wash tub shell of most FRONT LOADER models. This is a repair that would be rated as difficult due ...
Question about Whirlpool duet Washing Machines
...door bellow (rubber door boot) from the door frame ONLY and push inside the tub. Leave the other end of the door boot attached to the tub shell. If this is a small front loader, the bellow is ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions