Question about Whirlpool duet Washing Machines
...drum and spider as one unit. The cost to repair would be in the hundereds. See the following link to judge for yourself if you want to fix it yourself or have it fixed. ...
Question about Whirlpool duet Washing Machines
...hoses themselves could be torn or pierced, the metal coming from broken spiders in rear of metal drum. When the spiders (y shaped metal piece on back of interior metal drum) corrodes & starts ...
Question about Whirlpool duet Washing Machines
...drum support spider in this Frigidaire washer had corroded so much that the hub and drive shaft actually broke off. Note the pitting in the metal. You can see in the closeup that the metal seems to ...
Question about Whirlpool duet Washing Machines
...drum. This spider needs to be removed and the center bearing hammered or pulled out using a bearing puller (automotive garages use them) without damaging the spider. The bearing will have a rubber ...
Question about Whirlpool duet Washing Machines
...the drum is actually hitting the sides if the tub this could be a broken spider thats on the rear of the inner drum that holds the drum on if this comes loose it can cause serious personal ...
...cycle like its out of balance Check the inner drum by lifting up and down . If it moves at all in rlation to the outer tub then the spider bracket on the back of the inner drum is broken, Major
Question about Whirlpool duet Washing Machines
...out. reach inside drum that turns and try to move it up and down. If there is any movement the spider at the rear of the drum is broken. Will need inner drum and outer rear tub with bearing and
spider, the contraption that holds your drum horizontal and allows it to spin,may be corroding. It's called a spider, it's aluminum, and it's got only three legs but when those legs break, the plastic
Question about Whirlpool duet Washing Machines
...drum bearing spider had broken. On a front load the drum bearing is located at the back of the drum. To replace the part you take apart machine, undo the belt and depending on the model you may need ...
...and once per revolution. The spider on the back of the drum is most likely broken. The part should have a 10 year warranty. Labor should run 250 - 350, unless you call A&E, then it will be a lot
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions
