Empire DV-55 Heater "empire gas" Questions

...gas on a empire 40,000btu how to change the orfis from propane to gas on an empire 40,000 btu furnace. what is the model # for the furnace. You are going to have to change the pilot orofice and gas ...

...Empire DV-35 all works as it should - BUT has low heat. Main burner flame seems low. Could there be an issue with gas valve - not opening enough to allow full gas to main burner. Themopile voltage ...

empire their specs for their natural gas should have the answer the kit or conversion unit should have had the part -it might not need to be changed--but if it does info needed is size of heater btu's

...gas valve for this unit Empire DV-55SPP.It is lp gas.are there any web suppliers? Here you go. The link to suppliers to buy Empire heater parts. ...

...gas valve for empire DV352SG S/N T49918889 was there a recall on this gas valve? Being an ECS dealer, I'm not aware of a recall. The following link will give you a list of master parts dealers ...

...gas valve for Empire 7088-2 (Nat Gas) heater i have a 15 year old Empire Floor Furnace model 7088-2 (Nat Gas) that has worked perfectly, non stop. Best heater i have ever owned. Until Sandy put it ...

empire wall heater with wall vent - pilot light turns on, burner starts but turns off after about 30seconds - flickers first and then turns off. It sounds like the gas valve is dropping out. Make sure

I need a gas valve for this unit Empire DV-55SPP.It is LP gas.Are there any web suppliers? Try empireheaterparts.com-------The new valve should come with a LP converson kit if not already installed.

empire uf-30-1 can you use natural gas in unit buy just changing the burner orifice size NO! You have to change the pressure spring it the gas valve and the pilot orifice also.SET it @ 3.5WC.

wall heater burners wont ignite We have an Empire gas wall heater. I can light the pilot, but the burners don't ignite. Don't the burners light almost at once? you may have a bad gas valve