Whirlpool LER5636P Electric Dryer "runs till start switch" Questions

...till you open the door . is it the start switch or the timer that i need to replace? Good day, It could be either the push to start switch, or the centrifugal switch on the motor. You would need an ...

till there is no sound on the start, then dead untill another long period of rest. The dryer does not run each time the start switch is turned. If the dryer runs, everything works just fine. Hi, There

...runs till released. Marty Owens probably has a broken belt,there is what is called a "Broken Belt" switch by the motor inside on the idler pulley tensioner for the belt,if the belt breaks this switch ...

...start switch. DOES THE DRUM TURN OR JUST THE MOTOR KICK ON TILL YOU LET GO OF THE BUTTON. SEE IF YOU HAVE A BROKEN BELT. THERE MAY BE A SWITCH THAT KEEPS THE MOTOR FROM RUNNING IF THE BELT BREAKS. ...

...u hit the start button...also stays running when you open the door, wont shut off till you turn button to off You have a bad door switch or a wire has come off it. Should be cheap and easy to

...runs till you release button. HI! The Push To Start Switch is defective. Click on the following link to order a replacement switch. ...

till power switched off.I have replaced motor start capacitor but still faulty I have a multimeter do you know the resitance and colours of the start and run windings? thanks Strn1 You need a meter to

...till the cycle is over. I had a heavy load in and started then stopped real fast. Then it stopped working right. Fuse on house isn't issue since it runs. unplugged and replugged no luck. took out big ...

...till my son broke one of the cable hinges on the door. Now it will not start, but, I can hear the timer ticking.It is an older model #86173600 Sounds like door switch. Open door and push on door ...

...start switch for a moment till the motor centrifugal switch goes to the run winding.what i have found happening is a lint buildup in the motor switch area dose not allow the motor centrifugal switch ...