loc on dryer loc on dryer what does it mean and how can i fix it Hi, "LOC" indicates that the control panel settings are locked. Press the SELECT and OPTION button simultaneously to toggle this ...
...dryer loc LOC is a generic lock code meaning the door was either locked manually or accidentally. Also LOC will lock the control panel and can be manually locked as well. Try to reset the unit for ...
Question about Frigidaire Washing Machines
...LOC; however, I see that your question is listed under Frigidaire FEX831CS (Top Load Stacked Washer/Dryer). This specific laundry center does not have a digital display. May I please have your model ...
Frigidaire front load washing machine won't start All the lights are lit up on the front panel. When you try to start it it says err and then loc. We can't change any of the settings it wil say err ...
accidentally start or stop the dryer. Press and hold the Options and Select buttons for 10 seconds or until the ?LOC? on the display is cleared. Locking the control is done the same way it is unlocked
...dryer - to activiate it press options and select buttons at same time till LOC appears, and to reverse it or turn it off, press options and select buttons for 10 seconds - the instructions here say ...
Question about Frigidaire Washing Machines
loc coming on and my dryer wont work how can I fix this issue?? The control panel is locked. on the control panel, there will be either a "lock" button that you hold down for 3-5 seconds to unlock, or
Question about Frigidaire Washing Machines
...dryer? There is LOC code showing up The cost of the control panel will depend on the model. Usually these cost $200-300. However, the LOC often indicates a control panel lock is enabled. Try looking ...
...dryer is in an auto dry cycle. ?dn? - cycle is done in auto dry. ?PF? - a power failure to the board has occurred. ?Err? - an error has been detected. ?LOC? - control lock is activated. ?PAU? - cycle ...
Question about Washing Machines
...dryer when the LOC is displayed Likely solution as I do not have the full model number of your dryer. This means dryer control board thinks your machine is locked--- to get it out of lock mode ...
204 questions posted
Usually answered in minutes!
181 Questions
95 Questions
55 Questions
58 Questions
49 Questions