Lasko 5132 Ceramic Compact Heater "apart air model" Questions

...apart, allowing a little separation, that allowed more air into the mixture.  Replaced the rivets with screws and lock nuts.  The heater is back in service.  Mine was a double burner, ...

apart and replace the nozzle. there's a bronze filter in the nozzle. mounted on the back of the fan motor is an air generator. this air generator makes about 3.6 lbs of air pressure to pump up fuel to

air oil furnace made by Olsen/Airco model BCL-120S. It appears that the combustion chamber (fire box) is on its ?last leg?. Is there any way to take apart the heat exchanger and replace the combustion

apart, allowing space for additional air into the air/gas mixture.  Replaced all the rivets with screws and lock nuts.  Had to remove the guards for better access.  Did the trick for me

...air just blow it out. Usually not much goes wrong with these apart from blockages every now and then and most of the servicing places just blow them out with compressed air. Just make sure if you ...

...apart.  Everything should be tight, if not too much air gets into the mix.  I replaced the cheap rivets with screws and lock washers.  Did the trick for me.  Outer ring may have ...

...have an oxygen sensor on it and if it gets dirt in it that will happen... Take apart the pilot assembly and blow it out with high pressure air and then reassemble it...that should fix it... ...

...model TE-10-C serial 3657. The problem is a odor that we've noticed now that we're heating our apartment. My wife says it smells like cigarettes. I smoke, not in the home, and I can tell the it's not ...

...apart your heater and clean it well. If it still doesn't work after that, blow it out with an air compressor. If then it still isn't working, I suggest you sell that heater and buy a new

...out how to take model EVH vortex heater apart to clean. If you have access to a air compressor just blow it out, caned air is so so.You can put put the ca under hot water and get better