Mr. Heater Natural Gas Garage Heater - 45,000 BTU "disc furnace" Questions

...disc at top of furnace keeps tripping. The disc is doing its job, saving your life! If the heat exchanger gets too hot this disc is the safety. Find out how hot the heat exchanger is getting and what ...

need a wiring diagram Images for Disc Furnace Heater Need a wiring

...furnace runs but dont light check all safety switches located at burners and draft hood its a little round disc with a button that can be pressed to reset it.if there is an inducer motor check to see ...

Need power cord for pelonis model 1450W Safe-T-Furnace. Looks like power cord for Model PF-1212/B6A1 might work. Do you sell the power cord for the 1450W? You can use a replacement cord from most ...

Can you get replacement discs for pelonis ceramic heaters? One of mine is cracked. I have spent the last 1 1/2 hours going thru several of my catalouges and called a couple of my old suppliers and I ...

...be reset every couple of months.If the tenant changed the filter would this help? What would be an appropriate part no. for the disc in this furnace? I would first check the heat exchanger for ...

...disc cools down to a certain temperature it will close the circuit and your furnace will run again until it overheats and does the same cycle. There is a reason this control is tripping on you. Your ...

...furnace off check for continuity through the switch(usually a round disc looking thing with two wires going to it) if it ohms out then it is okay then run the furnace and after it shuts off check the ...

...furnace turns off. It doesn't even reach the desired temp. Do I need to replace the valve or the line leadin g from the valve to the lite? It is not the valve or the wire. Most likley it is the Temp ...

The fan does not turn on but the furnace does appear to heat uo Try turning the fan on manually at the Thermostat by clicking "Fan On"...if thiis turns the fan on...leave it running and you will have ...