Question about Citizen CLP Office Equipment & Supplies
faded on the left side and gradually increasing to full color on the right side. This is particularly noticeable in color printing (very bad) and somewhat noticeable in black. Printer is Samung CLP310
Question about Citizen CLP Office Equipment & Supplies
while printing in black middle of page fades out both sides of the page print well. this is about a 1 inch fade out in middle of page. Replace the drum of the particlular color cartridges. To know ...
PRINT IS FADED HALF THE PAGE IS FADED Remove toner cartridge and tilt from side to side to redistribute toner. Easy fix to try and usually the correct one.
Question about Citizen CLP Office Equipment & Supplies
...prints There is a faded strip down the left side of printed documents. all colour is fine in the same areas, and it says that the toner has not run out. What may be wrong with it? might it need ...
prints dark on one side and faded on the other side is the corona wire drum gone or is the black toner outlet blocked please let me know i am microsoft certified in hardware and this still has even me
...side of the label is not printing clearly. Its very faded, but the rest of the label is printing perfectly, and I changed the ribbon as well. Please help On the right hand side of the print head is a ...
Question about Citizen CLP Office Equipment & Supplies
faded prints after only a few weeks/200 pages in BW and Color, faded strip along left side of page. have always bought HP/Brother in past. never had a problem. after reading above comments-- my advice
...faded vertically all the way down BUT if changed to a color, it prints OK. Please let me know anything. It is a fairly new printer If it only happens with the black then you need to change out the ...
...faded on the right side of the page. I just replaced the toner cartridge and I shook the toner back and forth to make sure it was evenly spread on the roller. Any thought? LASER UNIT NEEDS TO BE ...
Question about Citizen CLP Office Equipment & Supplies
...prints good, except for about 1" going down the left side is very light or faded looking. try to remove toner cartridge and shake, plug in and make a self test print. if not work, you need to change ...
28 questions posted
Usually answered in minutes!
15 Questions
8 Questions
9 Questions
1 Questions
1 Questions