Durabrand DWT1905 TV "catv air" Questions

...air or CATV depending on what you are using. CATV is for cable or dish. Then go to menu settings and find the "autoprogram" option and select it. It will scan any available channels. Let it run ...

...sure tv is set to CATV and not Air. CATV is for cable. Then look for tuner options or channel edit options. Find the "autoprogram" option and select it. It will scan and remember all available ...

...CATV frequencies. The TV's are about 10 and 20 years old. Any ideas? all4brices, Did a "cable guy" install cable boxes on tv's or r u using the coax cable straight into the TV sets? Are TV sets still ...

...it is set to AIR or CATV depending if you are using cable/dish or AIR for antennae or converter. Then go in menu options and find the "autoprogram" and select it. It will scan all available

...paint room and now it will only go up to channel 69 The set returned when power removed to the AIR band which only goes up to 69.Go into customer menu and change from AIR or ANTENNA to Cable or

...air', 'catv-1', 'catv-2' on 'main' and 'sa' (what ever that is), but it always returns to channel 01 with nothing but noise and fuzz...can't seem to auto program....cable works because the other tv ...

...control cannot enter more than one didget when changing channels. have you tried pressing the TV/CATV on the actual set itself or going into the menu and changing the signal input to Cable or

...does not work when hooked up to cable Jensen 26inch picks up some channels but not clear...when switch from antenna to cable does not recognize cable is there a setting to change to CATV vs off air

...I get them back? Was scaning channels mashed a button then My channles were gone. Husband mashed more buttons .Now can't get channels 14-50 back. set in air band, you want catv or cable

...CATV). You will find it's set to "air" now. When set for off-the-air tuning, cable channels 2 through 13 work fine, but above that you get nothing. After you set your tuning mode to cable, rescan ...