Durabrand DWT1905 TV "add channel list remote" Questions

...able with the remote to direct enter with the numbers on the remote a channel and if it goes to that missing channel then in the main menu for the set "add" it to the up/down list of stored

...on Tv 2.Highlight Channels 3. Highlight List And Labes 4. Select channel # Vid & and Add vid to the list of Channels i need change my tv to input or output vidio. no sound, no picture but tv is ...

...channel add/delete function. I would check ebay or remotes.com for a replacemnt. In some cases the remote can be opened and the button that is not working can be cleaned and restored to working ...

...from the channel list. go to menu>channel>add/delete and select the channels you want and change them back to green. or auto program you can do this without the remote by menu button>channel> ...

...add or erase the channel selected above (step 4). 6) Press Menu repeatedly to exit the OSD (or wait until the OSD closes after a period with no key presses). Then use the Ch+/Ch- buttons to scroll ...

...at the link below for instructions on how to use the on screen menu to add channel 3 to the "active channels" list. ...

...channel setup option if you find this you should b able to manually go through your channels to add & delete the channels you want.If not you will have to go out a buy a universal remote.Make sure ...

...add the input 1 or 2 to the channel list so when you flip though the channels its there I used to have an older RCA TV. There was no obvious button or switch to change to the A/V jacks. RCA used a ...

...add channels If you have't its remote control; you can't select this option. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 ...

add 0 to the channel list to use the dvd. Any suggestions? If television has rca outs in the back(yellow, red, and white connectors) you must use the remote on the television to change the video input