Maxtor DiamondMax Plus 9 80 GB Hard Drive "seagate jumper" Questions

...jumper. Hi This may help you. There isnt a great deal available as most of the time the configuration settings are marked on the drive itself. ...

...jumper settings you require. ...

...is the jumper setting to service (format) the diamondmax plus 9 disk? This document might help you: ...

...seagate.com/staticfiles/maxtor/en_us/documentation/manuals/dm_plus_60_ultra_ata_manual.pdf The Jumper Settings are in Chapter 2, Page 5 (2-5) Looking at the page number for the PDF file it's on Page ...

jumper setting for slave drive ide If the drive is the Seagate Baracuda series, then simply remove all the jumpers from 8-pin jumper block and it will be a Slave drive. If you want any other settings,

WD drive won't work as master when Seagate 80GB drive connected as slave. New WD1600AAJB as master - works fine alone. I want to use Seagate 80GB as slave. Won't go. Computer stalls on start up. Both ...

...Jumper settings for Seagate ATA/IDE Internal drives <20gb & greater For older/smaller drives visit www.seagate.com that is right i had the same prob but as soon as i put the jumper in the master got ...

Jumper settings for Seagate and Maxtor IDE (ATA) harddrives, http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=196299&NewLang=en Follow the chart examples under the second heading

...Jumper settings Here's a link to them on the Seagate site... (Seagate acquired Maxtor) http://www.seagate.com/staticfiles/images/support/en/us/mxo_ata_jumpers_rev.jpg All Maxtor hard disks has a ...

...jumper is master and which is slave have a 80 gig Seagate barracude 7200:7 hardrive and need to know whow to tell whcih is master and which jumper is slave. On my original harddrive, this is clearly ...